Use and Care Manual

LUBRICATION

Lubricate with light oil as directed

below at least once each season

after the battery pack is

removed.

◾

Periodically lubricate the spring

and pivot pin in the quick-adjust

lever, the torsion spring and

pivot of the rear-discharge

door with light oil to prevent

rust (Fig.

26 & 27).

◾

Place the mower into the locked

storage position:

Move the cutting-height

adjustment lever toward the

front and engage it in the lowest setting (setting 1).

2. Open the handle-locking clamps and fully recess the

side rails to the compact position.

Press and hold the quick-adjust lever with your right

hand to release the handle.

Gently pivot the handle toward the front of the mower;

release the quick-adjust lever and continue to pivot the

handle until you hear and feel the lock pin engage in

the locked storage position.

◾

Place the folded mower upright on the ground

(Fig. 28 ).

◾

Lubricate the deck-height adjustment joint.

◾

For A40GC20B01, lubricate the bearings in both the

rear and

front wheels (Fig. 28).

spring

Pivot Pin

Pivo

Torsion Spring

Bearing

Deck-Height

Adjustment Joint