Made in America and Priced Right Henry Lever Action .22LR / .22 MAG / .17HMR Instruction Manual For All H001 Series Rifles Warning: You cannot use .22LR cartridges in a .22 Magnum rifle, and you cannot use .22 Magnum cartridges in a .22LR rifle. Important: Study this instruction manual carefully before you handle this firearm. Made In America and Priced Right IS A REGISTERED TRADEMARK OF THE HENRY REPEATING ARMS COMPANY TEL. 201-858-4400 Made in America | FAX. 201-858-4435 EMAIL. info@henryrepeating.
Welcome andWelcome Introduction and Introduction Thank you for purchasing your new Henry Lever Action Rifle. We are proud to have crafted this rifle for you in the great tradition of Henry Repeating Arms Company which dates back to 1860 when the first effective, lever-action repeating rifle was developed by our founder, Benjamin Tyler Henry. We go to great efforts to provide the highest quality of design, craftsmanship, manufacture and function that was established over 140 years ago.
SIMPLE LIMITED LIFETIME WARRANTY Henry Repeating Arms Company stands behind its products as it has historically. We offer a simple limited lifetime warranty. If you have a problem with a Henry rifle, and it is our fault, we will fix it at any time, and at no charge. The warranty does not cover excessive wear and tear to parts, or accidental damage to parts.
CAUTIONS: GENERAL HANDLING CAUTIONS 1. ALWAYS HANDLE YOUR FIREARM AS IF IT WERE LOADED so that you never fire it accidentally when you think it is unloaded. 2. NEVER POINT YOUR FIREARM AT ANYTHING YOU DO NOT INTEND TO SHOOT so that if it fires accidentally, injury, death, or damage to property will be avoided. 3. NEVER TAKE ANYONE'S WORD THAT A GUN IS UNLOADED.
LOADING/UNLOADING CAUTIONS 13. ALWAYS BE SURE BARREL, BORE, CHAMBER, AND ACTION ARE CLEAN AND CLEAR OF OBSTRUCTIONS. Clean a fouled firearm immediately so that it will function correctly and safely. 14. ALWAYS USE ONLY CLEAN, DRY, HIGH-QUALITY, COMMERCIALLY MANUFACTURED AMMUNITION IN GOOD CONDITION AND APPROPRIATE TO THE CALIBER OF YOUR FIREARM. Gun and ammunition manufacturers design their products within exacting engineering safety limits.
27. NEVER WALK, CLIMB, OR FOLLOW A COMPANION WITH YOUR FIREARM COCKED AND READY TO FIRE to eliminate risk of accidental discharge. When hunting, hold your firearm so that you can always control the direction of the muzzle. MALFUNCTION CAUTIONS 28.FAILURE TO FIRE: IF THE FIREARM FAILS TO FIRE DO NOT PUT IT DOWN OR OPEN THE ACTION. ALWAYS HOLD THE FIREARM, KEEPING IT POINTED IN A SAFE DIRECTION AND WAIT 30 SECONDS. IF A HANGFIRE (SLOW IGNITION) HAS OCCURRED, THE ROUND WILL FIRE WITHIN 30 SECONDS.
ammunition in the appropriate caliber but not all ammunition produces the same result. Henry RAC recommends that after you read and understand this manual, you go to the range and fire different ammunition which is appropriate to the caliber of your firearm. Once you find the ammunition which functions best, keep using it. Especially when cutting-edge reliability and accuracy are vital to you. When sighting your rifle, shoot a group to determine point of impact on the target.
WARNING: When the chamber is loaded, never place the hammer in the Fired (down) position (Figure A-3). WARNING: The safety is designed to secure the hammer, holding it from contacting the firing pin. However, this mechanism will not necessarily prevent the accidental discharge of this firearm as a result of jarring, abuse or mishandling. HOW TO LOAD YOUR HENRY LEVER ACTION RIFLE Prior to loading your rifle, make certain that the rifle is not already loaded.
down into position and lock it into place. Please be careful when pushing the inner magazine tube in, as it is under spring tension. The rifle is now ready for operation. HOW TO OPERATE YOUR HENRY LEVER ACTION .22LR / .22MAG / .17HMR RIFLE The rifle chamber can now be loaded by swinging the lever down completely and pulling it back to the closed position. Important: The rifle is now set to fire. The hammer has been moved from the Safety position, to the Full-Cock position.
sight base. To help you determine how far you have moved the sight, right or left, a soft pencil can be used. The front edge of the rear sight base comes to a point where it rests on the barrel. At the point of the sight base, lightly make a small mark with the pencil and carry it straight down to make a small adjoining mark on the barrel. This will show you how far to the right or left you have moved the sight base.
ILLUSTRATION OF PARTS 31S LIST OF PARTS 01 Receiver 19 Trigger 38 Extractor 02 Cover 20 Trigger Spring 39 Spring 03 Carrier Axle 21 Hammer 40 Ejector 04 Barrel 22 Hammer Pin 41 Ejector Pin 06 Cylinder Pin 23 Hammer Guide 42 Cover Screw 07 Taper Pin 24 Hammer Spring 44 Inner Mag Tube 08/09 Carrier 25/26 Rear Sight 45 Magazine Spring Guide 10 Carrier Screw 27 Rear Sight Elevator 46 Magazine Spring 11 Carrier Feed Lever 29 Barrel Band 47 Magazine Button 12
PARTS An illustration and list of part names are included in this manual. Please note that not all parts are available for sale. Those parts which are available should be installed by a licensed gunsmith. When ordering parts, please give part name and part number. Important: If you make unauthorized adjustments or use unauthorized parts, Henry Repeating Arms Company will not assume responsibility for the proper functioning of the rifle.
