MSDS

M A T E R I A L S A F E T Y D A T A S H E E T
Page 3 of 5
HE887 - TROPI-COOL SILICONE WHITE ROOF
COATING
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Use with chemical-protective gloves to prevent skin contact.
Respiratory Protection
This product is an encapsulated mixture which reduces the likelihood of exposure to hazardous particulates. Airborne
exposures to hazardous dusts or mists may be generated by spraying, sanding or grinding.
The level of respiratory protection needed should be based on the evaluation of chemical exposures by a health or safety
professional. If required, use a NIOSH-approved air purifying respirator with organic vapor cartridge and particulate filter
or supplied air respirator. Respirator use may be required due to secondary operations such as mixing, spraying,
sanding, buffing, etc.
Occupational Exposure Limits for individual ingredients (if available) are listed below.
Ingredient(s) - Exposure Limits
hydrotreated light petroleum distillate
ACGIH TLV-TWA 200 ppm (Skin)
silica, quartz
ACGIH TLV-TWA 0.025 mg/m3
OSHA PEL-TWA 30mg/m3 / (%SiO2+2) (total dust)
OSHA PEL-TWA 10 mg/m3/ (%SiO2+2) (respirable dust)
titanium dioxide
ACGIH TLV-TWA 10 mg/m3 (respirable)
OSHA PEL-TWA 15 mg/m3 (total dust)
9. Physical And Chemical Properties
Appearance
Viscous white liquid
Odor
Petroluem solvent odor
Chemical Type: Mixture
Physical State: Liquid
Melting Point: Not available °F
Boiling Point: 310-385 °F
Specific Gravity: 1.23
Percent Volatiles: 10-20
Vapor Pressure: not available
Vapor Density: >1
pH Factor: not available
Solubility: insoluble in water
Evaporation Rate: <1
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Extreme temperatures, ignition sources