MSDS
M A T E R I A L S A F E T Y D A T A S H E E T
Page 2 of 5
HE887 - TROPI-COOL SILICONE WHITE ROOF
COATING
3. Hazards Identification - Continued
Inhalation Hazards
May cause respiratory tract irritation. Prolonged inhalation of vapors or mists may cause central nervous system
depression, light-headedness, headache, nausea and loss of coordination.
Chronic/Carcinogenicity Effects
This product or one of its ingredients present at 0.1% or more is listed as a carcinogen by NTP, IARC or OSHA. See
Section 11 (Toxicological Information) for more details.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get
medical attention immediately if irritation develops and persists.
Skin
Remove contaminated clothing and shoes. Wash affected areas with soap and water.
Ingestion
Get medical attention immediately. DO NOT INDUCE VOMITING. Never give anything by mouth to an unconscious
victim.
Inhalation
Remove the person from the contaminated area to fresh air. If breathing is difficult, give oxygen. Contact a physician if
symptoms develop.
5. Fire Fighting Measures
Flash Point: 108 °F 42 °C
Flash Point Method: TCC
Lower Explosive Limit: 1.1
Upper Explosive Limit: 5.0
Fire And Explosion Hazards
Combustible liquid. Products of combustion include compounds of carbon such as carbon monoxide and smoke.
Extinguishing Media
Carbon dioxide, water, water fog, dry chemical, chemical foam.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Contain and/or absorb spill with inert material (e.g. sand, vermiculite). Collect and dispose in accordance with applicable
regulations.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Store in a cool, dry, well-ventilated area. Protect from physical damage. Protect from
extreme temperatures. Keep out of reach of children.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. When used outdoors, stay well away from building air intakes or
close and seal the intakes to prevent product from entering building.