TDS

Henry
®
Company, 999 N. Sepulveda Blvd., Ste. 800 El Segundo, CA 90245
Tel: [phone] Email: [e-mail]
www.henry.com
Revision Date: 09/25/2017
TECHNICAL DATA SHEET
880 Tropi-Cool
®
100% Silicone Stop Leak

Spray Sealer (black)
Physical Property
Typical Value
Test Method
Appearance (Cured) Black Matte Film -
Application Temperature (Ambient)
35 ºF to 100 ºF (2 ºC to 38 ºC)
-
CARB: Flexible Coating Max MIR
1.60
Calculated
Solids Content by Weight 47-48% Calculated
Tack-Free Time, at 70 °F (21 °C)
and 50% relative humidity
30 minutes -
Full-Cure Time, at 70 °F (21 °C)
and 50% relative humidity
8 hours -
Description
Henry
®
880 Tropi-Cool
®
100% Silicone Stop Leak
®
Spray Sealer is a premium, easy-to-use, 100% silicone sealer formulated to
provide a permanent solution. It is designed to form a tough and yet flexible watertight seal on a variety of surfaces while also
providing superior UV resistance and weathering characteristics. Its 100% silicone, moisture-cure chemistry creates a very
aggressive chemical bond with the surface, which allows for permanent ponding water resistance, extreme durability, and superior
capabilities of sealing and protection.
Features
• 100% waterproof
• 15-minute rain ready
• One coat application
• Excellent adhesion to many substrates
• Forms a watertight seal for permanent repair
• Limited lifetime warranty
Product Size
14.1 oz. canister (400 grams)
Shelf Life
Unopened, 18 months from date of manufacture when stored in a cool, dry, and shaded location.
Usage
Multi-purpose sealer waterproofs, seals and protects a variety of projects:
• Windowsills
• Foundations
• Skylights
• Gutters
• Flashings
• Roofs
• RVs
• Campers
• Boats
• Cars
• Concrete
• Glass
• Metal and more
Application
Clean: Before application, ensure the surface is completely clean, dry and frost-free. Clear any dust, dirt, debris and foreign
material that may prevent proper adhesion.
Apply: Sealer should only be applied to a clean, dry, frost-free surface as described above. Shake can vigorously for 1 minute
before application. Push top of the spray nozzle forward to start spraying. Apply a test area of coating to initiate flow and obtain feel