SDS

HE869- HENRY 869 ELASTOMERIC ALUMINUM
ROOF COATING
Revision Date 10-May-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 8
Precautions for safe handling
Advice on safe handling
Handle in accordance with good industrial hygiene and safety practice.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep containers tightly closed in a cool, well-ventilated place. Keep away from heat,
sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static
electricity).
Incompatible materials
Strong oxidizing agents.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
This product, as supplied, does not contain any hazardous materials with occupational
exposure limits established by the region specific regulatory bodies.
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Petroleum Asphalt
8052-42-4
TWA: 0.5 mg/m
3
benzene soluble
aerosol fume, inhalable fraction
-
Ceiling: 5 mg/m
3
fume 15 min
Stoddard solvent
8052-41-3
TWA: 100 ppm
TWA: 500 ppm
TWA: 2900 mg/m
3
(vacated) TWA: 100 ppm
(vacated) TWA: 525 mg/m
3
IDLH: 20000 mg/m
3
Ceiling: 1800 mg/m
3
15 min
TWA: 350 mg/m
3
Appropriate engineering controls
Engineering Controls
Showers
Eyewash stations
Ventilation systems.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin and body protection
Wear protective gloves and protective clothing.
Respiratory protection
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Positive
-pressure supplied air respirators may be
required for high airborne contaminant concentrations. Respiratory protection must be
provided in accordance with current local regulations.
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state
liquid
Appearance
paste
Odor
Petroleum distillates
Color
black
Odor threshold
No information available
Property
Values
Remarks • Method
pH
No information available
Melting point / freezing point
No information available
Boiling point / boiling range
>= 150 °C
Flash point
40 °C
Evaporation rate
No information available