Instructions / Assembly

TECHNICAL DATA SHEET
HE195 - POLYESTER FABRIC
Last Rev Date: 06/28/2012
Physical Properties
Maximum VOCAppearance
Fabric 0 g/l
Tensile Strength Film (Initial)
57.1 lbs (ASTM D-1682)
Maximum VOSColor
White to yellow white 0 lbs/gal
Trapezoidal Tear Strength
16.1 lbs (ASTM D-1117)
Mullen BurstElongation (Initial)
61-63% (ASTM D-1682) 176.8 lbs. (ASTM D-3786)
Weight Of Fabric
3 oz/ sq. yd.
Description
HE195 - POLYESTER FABRIC is a stitchbonded, high performance fabric for use in cold applied built-up roofing and
roof maintenance systems. HE195 - POLYESTER FABRIC is white to off white with lay lines for one and two ply roof
systems. It is ideal as the reinforcing component in cold process roofing and repair using either water-based asphalt or
acrylic emulsions, or solvent type coatings or mastics. In properties required for roofing systems - tear strength, puncture
resistance, and tensil strength combined with elongation - HE195 - POLYESTER FABRIC has been shown in tests with
asphalt emulsion and cutbacks to be far superior to conventional roofing felts weighing five to seven times as much as
HE195 - POLYESTER FABRIC. HE195 - POLYESTER FABRIC is a polyester that will readily conform to irregular
surfaces and standing seam metal roof decks. It is also much easier to handle and apply properly than other soft
polyester sheets.
Usage
HE195 - POLYESTER FABRIC
is highly recommended for reinforcing:
· # 107 Standard Asphalt Emulsion, # 109 Liquid Roof Neoprene Modified Emulsion, or # 203, # 403, # 902, or #
903 cutbacks for roof systems and maintenance of previously coated, modified or standard cap sheet and exposed
metal roof
· # 204, # 208, # 209, # 289, #295, # 504, #505, #508, #905, or #906
mastics for repairs, flashing, and seam-sealing
· # 220, # 280, # 287, or # 520
reflective coatings for added durability
Roofing System Specifications are available for built-up roof and maintenance membranes weighing only one pound or
less per square foot. 10 year warranties are available. The weight factor may enable re-roofing without the need for
complete removal of the existing membrane.
Surface Preparation
Follow the directions on the material being used with HE195 - POLYESTER FABRIC for proper preparation of the
surface.
Henry Company 909 N. Sepulveda, Ste 650, El Segundo CA 90245-2754
Technical Services Phone: [phone] - Email: [e-mail]
The Henry Company is the parent company of Bakor, Inc.
www.henry.com
TECH HE195