MSDS

M A T E R I A L S A F E T Y D A T A S H E E T
Page 2 of 7
HE104Q - QUICKDRY ASPHALT PRIMER (AEROS OL
CAN)
3. Hazards Identification - Continued
Inhalation Hazards
Exposure to vapors or mists may cause respiratory tract irritation. Inhalation of vapors or mists may cause central
nervous system depression, light-headedness, headache, nausea and loss of coordination.
Chronic/Carcinogenicity Effects
None of the ingredients of this product comprising over 0.1% are classified as carcinogenic according to OSHA, National
Toxicology Program (NTP), International Agency for Research on Cancer (IARC) or the American Conference of
Governmental Industrial Hygienists (ACGIH).
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get medical
attention immediately if irritation develops and persists.
Skin
Remove contaminated clothing and shoes. Wash affected areas with soap and water.
Ingestion
Get medical attention immediately. DO NOT INDUCE VOMITING. Never give anything by mouth to an unconscious
victim. Call a physician or poison control center immediately.
Inhalation
Remove the person from the contaminated area to fresh air. If breathing is difficult, give oxygen. Get medical attention
immediately.
Note To Physician
Aspiration of liquid into the lungs during swallowing or vomiting can cause lung inflammation, serious lung damage and
even death from chemical pneumonitis.
5. Fire Fighting Measures
Flash Point: -156 °F
Flash Point Method: Setaflash
Lower Explosive Limit: 1
Upper Explosive Limit: not available
Fire And Explosion Hazards
Flammable Gas. Closed containers may explode when heated due to increased pressure.Vapors are heavier than air
and may spread long distances and ignite.Thermal decomposition (burning) may release irritating, corrosive and/or toxic
gases, vapors and fumes.
Extinguishing Media
Chemical foam, carbon dioxide (CO2), or dry chemical. Do not use direct stream of water.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Contain and/or absorb spill with inert material (e.g. sand, vermiculite). Collect and dispose in accordance with applicable
regulations. Avoid runoff to waterways and sewers. For large spills, contain runoff and recover by pumping with explosion
proof equipment.