MSDS

M A T E R I A L S A F E T Y D A T A S H E E T
Page 4 of 7
HE104Q - QUICKDRY ASPHALT PRIMER (AEROSOL
CAN)
9. Physical And Chemical Properties - Continued
Odor - Continued
Percent Volatiles: <70
Vapor Pressure: 2000@70ºF
Vapor Density: >1
pH Factor: not applicable
Solubility: dispersible
Evaporation Rate: <1
.
Boiling point includes propellants.
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Keep away from ignition sources, heat and flames.
Incompatible Materials
Avoid contact with strong oxidizing agents and acids.
Hazardous Decomposition Products
Toxic and irritating gases, vapors or fumes, carbon monoxide (CO), carbon dioxide (CO2).
11. Toxicological Information
Chronic/Carcinogenicity
None of the ingredients present in this product, at concentrations equal to or greater than 0.1%, have been determined
to be carcinogenic by IARC, NTP, OSHA, or ACGIH.
Miscellaneous Toxicological Information
Toxicological testing has not been conducted for this product overall. Available toxicological data for individual
ingredients are summarized below.
Ingredient(s) - Toxicological Data
1,2,4-trimethylbenzene
LD50 (oral, rat): 5000 mg/kg
LC50 (rat): 18 g/m3 (4-hour exposure)
1,3,5-trimethylbenzene
Lethal dose (oral, rat): 23 g/kg lethal to 7 of 10 test animals
LC50 (rat): 24 g/m3 (4-hour exposure)
aromatic petroleum distillates
LD50 (oral, rat): 2900 mg/kg
isobutane
LC50 (rat) >1.3%, 4-hour exposure; 57%, 15-minute exposure
propane
LC50 (rat) >80%, 15-minute exposure
xylene
LD50 (oral, rat): 5400 mg/kg
LD50 (dermal, rabbit): 12180 mg/kg
LC50 (rat): 6350 ppm (4-hour exposure)