MSDS

M A T E R I A L S A F E T Y D A T A S H E E T
Page 3 of 7
HE104Q - QUICKDRY ASPHALT PRIMER (AEROSOL
CAN)
7. Handling And Storage
Handling And Storage Precautions
Keep away from ignition sources. Keep containers tightly closed. Store in a cool, dry, well-ventilated area. Do not handle
or store near heat, sparks, flame, strong oxidants or strong acids. Use only with adequate ventilation. Ground all
containers.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. When used outdoors, stay well away from building air intakes or
close and seal the intakes to prevent product from entering building.
Eye/Face Protection
Chemical splash goggles or faceshield over safety glasses or goggles recommended.
Skin Protection
Use with chemical-protective gloves to prevent skin contact.
Respiratory Protection
The level of respiratory protection needed should be based on the evaluation of chemical exposures by a health or safety
professional. If required, use a NIOSH-approved air purifying respirator with organic vapor cartridge or supplied air
respirator.
Occupational Exposure Limits for individual ingredients (if available) are listed below.
Ingredient(s) - Exposure Limits
1,2,4-trimethylbenzene
ACGIH TLV-TWA 25 ppm
1,3,5-trimethylbenzene
ACGIH TLV-TWA 25 ppm
aromatic petroleum distillates
OSHA PEL-TWA 500 ppm
petroleum asphalt
OSHA PEL-TWA 5mg/m3
ACGIH TLV-TWA 0.5mg/m3 (Benzene soluble aerosol)
isobutane
ACGIH TLV-TWA 1000 ppm
propane
ACGIH TLV-TWA 1000 ppm
OSHA PEL-TWA 1000 ppm
xylene
ACGIH TLV-STEL 150 ppm
ACGIH TLV-TWA 100 ppm
OSHA PEL-TWA 100 ppm
9. Physical And Chemical Properties
Appearance
Black aerosolized liquid
Odor
Strong petroleum solvent odor
Chemical Type: Mixture
Physical State: Gas
Boiling Point: -20 to -10 °F
Specific Gravity: 0.83