TDS
TECHNICAL DATA SHEET
HE101 - NON-FIBERED FOUNDATION COATING
Last Rev Date: 04/12/2012
Physical Properties
Drying Time @ 50% R.H. 68ºF
(20ºC)
Appearance
Smooth gloss black 8 hrs set to touch
Solids By Weight
74% minimum
Flash PointBase
Refined asphalt 105º F (ASTM D-3278)
Specific Gravity @ 77º F (25ºC)
0.93
GlossBrookfield Viscosity
2000-4000 cPs (60º) >80
Weight Per Gallon
7.6- 8.2 lbs (ASTM D-1475)
Maximum VOCConsistency @ 77º F
Brush, Spray 247 g/l
Description
HE101 - NON-FIBERED FOUNDATION COATING is a cold applied, non-fibrated, liquid asphalt in a solvent system
ideal for dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly
dry. NOT TO BE SOLD IN SOUTHERN CALIFORNIA.
Usage
HE101 - NON-FIBERED FOUNDATION COATING is recommended for commercial or residential foundations.
Coverage
1.5 to 2.0 gallons per 100 square feet. Do not over-apply.
Surface Preparation
FOR EXTERIOR USE ONLY. Surface must be clean and dry, and free of moisture both on and beneath the surface.
Remove rust and scale from metal by wire brushing. Carefully inspect entire area to be coated. Repair all cracks, breaks,
tears and holes.
Application
Stir coating thoroughly. Do not thin. Apply a single coat over the entire surface with a brush or heavy duty spray
equipment.
Precautions
In cold weather, store HE101 - NON-FIBERED FOUNDATION COATING in a warm room overnight before using. DO
NOT APPLY IF THERE IS A THREAT OF RAIN WITHIN 24 HOURS. Avoid contact with coating after it is applied. Over-
application, especially in cold weather, may cause sagging. Exposed coating tends to soften in warm weather. Do not
heat container or store at temperatures greater than 110ºF. When transporting this product, be sure the pail is secured
and the lid is tight. Do not allow pail to tumble as this may loosen the lid and allow leakage to occur.
Cleanup
Remove coating from tools, etc., with paint thinner or mineral spirits. Clean hands with a waterless hand cleaner.
Henry Company 909 N. Sepulveda, Ste 650, El Segundo CA 90245-2754
Technical Services Phone: (800) 486-1278 - Email: techservices@henry.com
The Henry Company is the parent company of Bakor, Inc.
www.henry.com
TECH HE101


