Manual

shoot lower, then lower the insert. To adjust your rifle for

windage (left/right), we suggest that you move the rear sight to

the left or right as desired. The rear sight sits in a dovetail slot

cutout in the barrel. To adjust your rifle for windage use a

plastic mallet, or a hammer and a brass wedge to tap it in the

direction you want your hits to land. For example: if you are

shooting to the left, you need to tap the sight over to the right

to correct the point of impact. Conversely, if you are shooting to

the right then you will need to tap the sight over to the left.

HOW TO CLEAN YOUR HENRY BIG BOY RIFLE

You do not have to disassemble this rifle in order to

clean it sufficiently and to keep it operating properly.

In order to clean it, we suggest that you first open the action

y swinging the lever down. Use a brand name rifle

cleaning kit and run the cleaning rod down the bore from

the muzzle end toward the breech. Wipe the bolt clean of

any debris with solvent and a patch or small rag. Spray the

bolt with some gun oil.

If you prefer to take your rifle apart to clean it, then we

suggest the following: Open the action by swinging the lever

down. Remove the lever screw and then remove the lever.

Next, remove the bolt from the receiver.

Note: This will loosen the ejector inside the receiver, so be

very careful not to misplace it. You can then remove the

ejector from the slot on the left side of the receiver. Use a

brand name rifle cleaning kit and clean the bore from the