Manual

should be resting in the fired down position. With the rifle pointing upward,
withdraw the inner magazine tube. Tip the gun downward, allowing cartridges to
slide out into a container. Replace the inner magazine tube. Open the action again,
by cycling the lever, to make certain that there are no cartridges in the chamber.
Cycle the action multiple times to insure that no live rounds remain in the
chamber.
SIGHT ADJUSTMENTS - Your rif
le is equipped with a fully adjustable rear sight.
The rear sight is adjustable for elevation (shooting high and low) and for windage
(shooting left and right). In order to shoot higher, you need to raise the rear sight. In
order to shoot lower, you need to lower the rear sight. In order to raise or lower the rear
sight, you need to grab the “ears” of the rear sight, and lift it up, in order to move the
rear sight elevator, which sits below the ears. Your rifle can be adjusted to shoot higher
by moving the rear sight elevator backward by one or more notches. In order to shoot
lower, the rear sight elevator should be moved forward. In addition, the rear sight
contains a white diamond insert for fine-tuning height adjustment. This part is held in
place by a screw. This reversible piece gives you a choice of U shape or V shape and
can be adjusted for height. If you want to shoot higher, raise the insert. If you want to
13