Manual

HOW TO LOAD

This rifle is a tubular feed design, using a brass inner

gazine tube. Cartridges are loaded into a loading port, a

cutout in the blued outer magazine tube located underneath

the barrel. Rotate the inner magazine tube to disengage.

Pull the inner magazine tube out until the follower (the black

part at the end of the inner magazine tube) clears the

loading port in the outer magazine tube. You can either

remove the brass inner magazine tube completely or keep

it positioned in the outer magazine tube just past the

loading port. With the muzzle pointed upward, insert the

rimmed end of the cartridges into the loading port in the

outer magazine tube and allow them to slide down towards

the action. Do not exceed the capacity of the

magazine, which is 10 r

ounds. Next, push the

inner ma

gazine tube back down into position, and lock it

into place. The rifle is now ready for operation.

HOW TO OPERATE YOUR HENRY BIG BOY RIFLE

The rifle chamber can now be loaded by swinging the

lever down completely, and pulling it back into a closed

position. The hammer has been moved into the cocked

position and the rifle is now ready to fire. If you are not yet

ready to fire, then place your thumb on the hammer, and

disengage the hammer by pulling the trigger slightly

rearward. Immediately release the trigger while still holding

the hammer, and bring the hammer into the fired down

position. You now have the gun in loaded but safe to carry

position. If you want to fire the gun, bring the hammer back

to the cocked position, aim in a safe direction at your target,

and pull the trigger.

HOW TO UNLOAD THE MAGAZINE AND

CHAMBER OF YOUR HENRY BIG BOY RIFLE

To unload the magazine and chamber, the hammer