SDS

Henry

546 Feather Edge Additive Page 1 of 6
13-Jul-2016
SAFETY DATA SHEET
Manufacturer’s name and address:
The W.W. Henry Company
400 Ardex Park Dr.
Aliquippa, PA 15001 USA
Supplier’s name and address:
Refer to Manufacturer
Information Telephone No. : [phone]
Website Address : http://www.wwhenry.com
24 Hr Emergency Telephone # : CHEM-TEL: [phone] OR 1-813-248-0585 (call collect)
Product Identifier : Henry

546 Feather Edge Additive
Product ID No. : 70010032
Trade Name/Synonyms : Henry 546
Material Use : Water based latex additive
Uses Advised Against : No information available.
GHS Classification per 29 CFR 1910.1200 (OSHA HCS 2012) and HPR (WHMIS 2015)
Not classified as hazardous.
GHS Pictograms
None.
Signal Word
None.
Hazard Statements
None.
Safe Handling Instructions: Avoid eye and skin contact. It is recommended to use safety glasses and
gloves during handling. During installation process, adequate ventilation of the
work area should be maintained. Although the adhesive is low VOC, persons
who are sensitive to odors or chemicals should avoid the work area during
installation. Keep container closed.
Hazards Not Otherwise Classified
None.
% With Unknown Acute Toxicity
Less than 1% by weight of this product consists of ingredients with unknown
acute toxicity.
Ingredients
CAS #
% (by weight)
No hazardous ingredients
N/Ap
100
General : Call a doctor if you feel unwell.
Inhalation : If a worker develops breathing problems while working with this material, remove
the worker to fresh air and keep at rest in a position comfortable for breathing.
SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION
SECTION 2 – HAZARDS IDENTIFICATION
SECTION 3 – COMPOSITION/INFORMATION ON INGREDIENTS
SECTION 4 – FIRST AID MEASURES