SDS

Henry
®
444 FRP Panel Adhesive Page 1 of 8
17-Mar-2022
SAFETY DATA SHEET
Product Identifier : Henry
®
444 FRP Panel Adhesive
Product ID No. : 70010462
Trade Name/Synonyms : Henry 444
Material Use : Adhesive for installing fiberglass-reinforced plastic panels.
Restrictions on Use : For indoor use only. Use only as recommended on Technical Data Sheet.
Manufacturer’s name and address:
ARDEX L.P.
400 Ardex Park Drive
Aliquippa, PA 15001 USA
Information Telephone No. : [phone]
Website Address : http://wwwardexamericas or http://www.wwhenry.com
24 Hr Emergency Telephone # : CHEM-TEL: [phone] OR 1-813-248-0585 (call collect)
GHS Classification per 29 CFR 1910.1200 (OSHA HCS 2012) and HPR (WHMIS 2015)
Skin corrosion/irritation; Category 2
Serious eye damage/eye irritation; Category 2B
Specific target organ toxicity, single exposure; Narcotic effects; Category 3
Reproductive toxicity; Category 2
Specific target organ toxicity, repeated exposure; Category 2
GHS Pictograms
Signal Word
Warning!
Hazard Statements
Causes skin irritation.
Causes eye irritation.
May cause drowsiness or dizziness.
Suspected of damaging fertility or the unborn child.
May cause damage to organs <kidneys, lungs, liver, heart, central nervous
system (CNS), eye, thyroid, and pituitary gland > through prolonged or repeated
exposure.
Precautionary Statements
Do not handle until all safety precautions have been read and understood. Do
not breathe dust/vapors. Use only outdoors or in a well-ventilated area. Wear
protective gloves/protective clothing/eye protection. Wash hands and exposed
skin thoroughly after handling. Take off contaminated clothing and wash before
reuse. Do not subject to grinding. Store in a well-ventilated place. Keep
container tightly closed. Store locked up. Dispose of contents / container in
accordance with federal, state, and local laws. Do not allow product to enter
drains.
SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION
SECTION 2 – HAZARDS IDENTIFICATION