Datasheet

M
SDS-No.: 43178
V001.7
P
attex hot Sticks transparent
P
age 2 of 4
Inhalation:
Move to fresh air.
Skin contact:
After contact with the hot melt: cool with water, seek medical attention.
Eye contact:
After contact with the hot melt: cool with water, seek medical attention.
Ingestion:
not relevant.
5. Fire fighting measures
Suitable extinguishing media:
All common extinguishing agents are suitable.
Extinguishing media which must not be used for safety reasons:
None known
Special protection equipment for firefighters:
Wear self-contained breathing apparatus.
Wear protective equipment.
Special hazards by the product itself:
None known
6. Accidental release measures
Personal precautions:
Ensure adequate ventilation.
Avoid contact with skin and eyes.
Clean-up methods:
Remove mechanically.
Dispose of contaminated material as waste according to item 13.
7. Handling and storage
Handling:
No particular measures required.
Storage:
Store in a dry place.
Protect from direct sun-light and temperature above 50°C in any case.
8. Exposure controls / personal protection
Engineering controls:
Molten product: provide adequate ventilation.
Respiratory protection:
Not needed.
Hand protection:
Wear refractive gloves while working with the hot melt.
Manufacturer e.g. German company KCL, type Typ K-TECT (< 250°C).