User manual

15
Installation is complete; you can click “Finish” and start setting your counter
with the aid of the programming assistant.
6 Configuring with the programming assistant
6.1 Writing and reading configuration data
The counter can be programmed straight from a computer using the program-
ming assistant. The counter must be connected to the computer. Click the but-
ton “Begin transfer” in the File/Transfer menu to transfer the configuration
data to the counter. Click the button “Read” to read out the configuration data
on the computer.
6 Configuring with the programming assistant
p1_tico_773_2773001_Betriebsanweisung_06062011_de_en.indb 15 02.02.2012 15:49:01