User manual

20
7 Communication interface
7.2 Overview of generic interface functions:
Basic functions:
1. Read / write the basic counter functions
2. Read / write the function codes
3. Read / write the USER monolayer times
Read / write values:
1. Read / write the preset values
2. Read / write the prescaler value
3. Read / write the counter values
4. Read the tachometer value
Special functions:
1. Reset the counting values
2. Reset the counter
3. Activate/deactivate status reports (changes in preset status)
4. Read the software version
5. Read the software number
6. Save all values to the EEPROM
7. Direct access to the display, e.g., for messages
7.3 List of commands:
Command R / W / F Value Description
BFN R/W 0..4 Set the basic function
F00 W 0 / 1 Set the default values
F01 R / W See Manual Function code 1 ( F01 )
:: R / W :: ::
F35 R / W :: Function code 35 ( F35 )
UT1 R / W 000.01 to 599.99 Output user monolayer
time 1
p1_tico_773_2773001_Betriebsanweisung_06062011_de_en.indb 20 02.02.2012 15:49:02