User manual

6
2 Security
2.1 Security
Operating instructions 2772083 form an integral part of these operating
instructions and must be observed in full. They contain safety warnings
and procedural instructions for the multifunction counter. These operat-
ing instructions address additional security aspects relating to the USB
and RS232 interfaces.
Ignoring the procedural instructions and safety
information in these instructions could produce
extremely dangerous situations.
Warning!
Danger from ignoring the safety information! Any
non-compliance with the safety information, and
specifically with the warnings in operating instruc-
tions 2772083, can produce dangerous situations.
2.2 Proper use of the interfaces
The interfaces can be used to configure the counter, read out or
overwrite values, and perform functions. Values can be read out at any
time. Values may only be overwritten or functions performed when the
machine is stationary. If and to the extent that values have to be over-
written or functions performed during the process flow, the manufac-
turer of the control unit must ensure that these actions do not pose any
risks for people or property
Danger!
Writing values and performing functions during an
ongoing process can produce dangerous situations.
2 Security
p1_tico_773_2773001_Betriebsanweisung_06062011_de_en.indb 6 02.02.2012 15:48:58