How-To Guide

Instructions
and Safety Information
HM803B
Wireless Hygiene Mouse with Scroll Wheel Sensor
Quick Start:
1. Take out the USB receiver dongle
2. Insert the supplied batteries as marked inside the
battery compartment
3. Close the battery cover and tighten the screws
4. Connect the dongle to a free USB port at your PC and
start your computer
5. Start using the mouse after automatic driver installation
has completed
As distributor of batteries, we have the following obligations under
§18 BattG:
1) Batteries can be returned free of charge after use in the commercial firm.
2) End users are legally obliged to return used batteries.
3) Manufacturers of batteries are required to mark batteries with the
following symbol before placing them on the market for the first
time:
The manufacturer of batteries shall label batteries containing more than
0.0005% by mass of mercury, more than 0.002% by mass of cadmium or
more than 0.004% by mass of lead, before placing them on the market for
the first time with the chemical symbols of metals (Hg, Cd, Pb) in which the
limit is exceeded. The characters are to be applied below the symbol.
Safety Note: The enclosed batteries must not be charged!
(1) Remove the batteries from the mouse and plug out the dongle
from the computer
(2) Plug in the dongle to the computer
(3) In the first 15 seconds after the dongle is plugged, place the
mouse as close as possible to the dongle (less than 1cm). Press
and hold right button and middle button (inside the battery
compartment) and install the batteries to the mouse
(4) Keep holding the right button and middle button for 2 seconds
and then release them
(5) Test the mouse for function. If the pairing process was not
successful, repeat the instructions from step (1)
Delivery Content:
- 2,4 GHz wireless mouse - Screwdriver
- 2,4 GHz USB-receiver - Instructions
- 2x AAA batteries
FAQ
How to pair a dongle
with the device?
Please follow the instructions
below