Users Manual

The CKW has been paired to the provided dongle, it is ready to use; below

instruction is only for user who may want to pair the dongle again:

1. Plug the RF dongle into the target PC.

Place the CKW close to the dongle, within 20cm.

Now you can get the CKW ready by pressing “Fn+ESC” to switch the CKW into pairing mode.

4. The LED will keep flashing until the pairing process complete; when LED stop flashing, keyboard is ready to use.

Special function keys on CKW

5. Fn + ESC = Pair

6. Fn + WIN = App

7. Fn + F10 = Print screen

8. Fn + F11 = Scroll Lock

9. Fn + F12 = Pause

10. Fn + Delete = Insert

11. Fn + Right Shift = Disabling the typing function for keyboard cleaning, press Fn + Right Shift again to unlock

12. Fn + Up arrow = Page up

13. Fn + down arrow = Page down

14. Fn + left arrow = Home

15. Fn + right arrow = End

Charging the CKW

1. Using the provided USB cable and connect the CKW to a USB2.0 port, the keyboard will being charged immediately, 5

hours is recommended for fully charging the CKW

2. During charging, if the CKW is connecting to a PC USB port via a USB cable, the CKW will be working as a HID

keyboard.

PAGE 1
The CKW has been paired to the provided dongle, it is ready to use; below instruction is only for user who may want to pair the dongle again: 1. Plug the RF dongle into the target PC. 2. Place the CKW close to the dongle, within 20cm. 3. Now you can get the CKW ready by pressing “Fn+ESC” to switch the CKW into pairing mode. 4. The LED will keep flashing until the pairing process complete; when LED stop flashing, keyboard is ready to use. Special function keys on CKW 5. Fn + ESC = Pair 6. Fn + WIN = App 7.
PAGE 2
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.