Users Manual

How to pair the Bluetooth Keyboard with PC

1. Go to “Setting” in the Windows and select “Bluetooth and other device”, select “add Bluetooth or other

devices”

2. In the prompt out window, select “Bluetooth”

3. Pressing “Fn + ESC” to switch the keyboard into Bluetooth pairing mode, indicator LED will flash.

4. On the PC side, in the prompt out window, the PC should be able to find a device called “BLTBT”, please

select the “BLTBT”.

5. A window will prompt out for showing a pairing code, please type exactly the provided code on the

keyboard as shown in the window and then press the “Enter” on the keyboard to confirm the pairing.

6. After the Step 5, indicator LED will stop flashing, the keyboard should be able to show up in the “Mouse,

keyboard, & pen” category, now the keyboard is connected to the target PC and ready to use.

Special function keys on Blt bt series Keyboard

For all versions

 Fn + ESC = Pair

Only for backlit versions

 Fn + Down Arrow = Decrease Backlit Brightness; Fn + UpArrow = Increase Backlit Brightness

 (For Wireless version, backlit will turn off to save power if there is no key stroke detected within 10 secs)

Charging the Keyboard

Connect the keyboard to charging dock rated at 500mA, the keyboard will start charging immediately, 5 hours

is recommended for fully charging the Keyboard.

PAGE 1
How to pair the Bluetooth Keyboard with PC 1. Go to “Setting” in the Windows and select “Bluetooth and other device”, select “add Bluetooth or other 2. 3. 4. 5. 6. devices” In the prompt out window, select “Bluetooth” Pressing “Fn + ESC” to switch the keyboard into Bluetooth pairing mode, indicator LED will flash. On the PC side, in the prompt out window, the PC should be able to find a device called “BLTBT”, please select the “BLTBT”.
PAGE 2
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.