User's Manual

0x0C

4-3-14. Clear cursor line

0x18

Clears the line containing the cursor. After this command is executed, the cursor moves to

the left end position on the current line.

4-3-15. Set cursor on/off

0x1F

0x43

Turns the cursor on or off. The cursor is a underscore.

- When n = 0, the cursor is turned off.

- When n = 1, the cursor is turned on

4-3-16. Set the blink interval

0x1F

0x45

N specifies the blink interval. When n = 0, the display is kept on. When n = FF, the display

is turned off but the contents of the display are maintained. When the power is turned on, n

= 0 is selected by default.

4-3-17. Change to Standard Communication Mode

0x1F

0xBA

Change to Standard Communication Mode.

4-3-18. Initialize Display

0x1B

0x40

Clear display screen and start video file again.