User Instructions

12

time, the service life of the battery will be affected.
Charging time
When the AC voltage is very low, the charging time is very long
Charging time is approximately 4 hours (depending on the state of the device)
The normal charging temperature ranges from 0 °C to 40 °C. When the temperature
exceeds 0 °C to 40 °C, the service life of the battery is shortened.
Using non-standard chargers can prolong charging time and damage the stability of the
tablet.
Use non-standard charger to charge, will affect the operation experience!
Attention:
■ When using the tablet for the first time, please fully charge the battery before using it.
When you connect the charger for a long time, the battery life will be affected..
■ Remove the charger when you do not want to charge it
■ When the tablet is out of power for a long time, when the charger is just connected, it will
not show the charging status immediately. Only after the charger is connected, the device
will show the charging status.
■The charger is a safe device, please be careful when using it!

7. The main parameters
¾ lcd 10’’ 1920*1200 capacitance 400 to 500nit visible under the sunlight
¾ Android 11 operating system
¾ The charger5V 3AMAX 15W.
¾ Headphone jack3.5mm
¾ Support for one-dimensional scanning (optional)
¾ Support theHF RFID 13.56MHz
¾ Rear Camera 13M.0M
¾ Support flash LED
¾ Size: 275*178*18mm
¾ weight: 950g (without fingerprint function)
¾ Support 10 points touch
¾ Support Beidou+GPS+glonass
¾ Support Proximity Sensor and Geomagnetism sensor
¾ Supportmulti language
¾ Back 16pin pogopin include （1USB, 1 RS232， 1 UART， 3.3V, 5V) and bottom
8pin (1USB,1RS232,1UART,5V)
8.Specifications and Functions
8 .1 NFC (optional)
¾ Working frequency band:13.56MHZ
¾ Support agreement: Support ISO/IEC 15693, ISO/IEC 14443A profile
¾ Supported formats: SR176, SRIX4K (TYPE-B), I- Code2, TI RFID label-it HF-I,