Owner Manual

2. Blot up liquids immediately with a clean dry cloth. Do not allow spills or puddles to
remain on the floor for an extended period of time as it may cause damage to the wood
flooring.
3. For routine cleaning — Use the Bona® Swedish Formula® Hardwood Floor Care
System. For information on Bona Kemi products call 1-800-574-4674 (8-5 MST) or go to
www.bonakemi.com. Bona floor care product systems can be sourced through your
local flooring retailer.
4. Apply Hardwood Floor Cleaner to a clean rag to remove heels marks or stains.
5. Do not damp mop floor with water or allow water to remain on the floor as it may
damage the flooring. Avoid the use of products that contain oils or wax that may leave a
residue allowing the floor to be slippery or sticky and in addition these materials may
prevent future coats of finish from properly bonding to the original factory finish.
REPAIR PROCEDURES
Use of fillers or touch up kits available can help to repair minor scratches and/or gouges
in the floor. In the event that a board has become damaged beyond repair it is possible
to remove an individual board and replace it with a new one according to NWFA
installation instructions regarding single board replacement.
RECOATING PROCEDURES
When the hardwood floors have lost their shine, they usually can be recoated to restore
the desired gloss level using the Bona PrepTM system with Bona TrafficTM or Bona
StrongTM finishes. Prior to recoating the floors the finish manufacturer instructions must
be followed properly to help ensure a successful application of finish. If you are thinking
about recoating your hardwood floor, consider hiring a Bona Certified Craftsman to give
you peace of mind in a job well done while saving you time and effort. A Bona Certified
Craftsman is a professional contractor that has been trained in the Bona Floor Care
System. The Bona Recoat System will maintain your floors with the industry’s best
protective finish available.