Installation Guide

ManualsBrandsHembry Creek ManualsBathBlox 25 in. Vanity in Dark Walnut with Vitreous China Vanity Top in White

INSTALLATION INSTRUCTIONS

BLOX Combo

VANITY

HCK-BLOX-DRG24DWVC1

THANK YOU FOR CHOOSING HEMBRY CREEK

Please take a few minutes to review this manual before you start installation. If you encounter any installation problems, please don’t

hesitate to contact us. Before you begin, please observe all local building codes. Unpack the new product and inspect for damage.

The appearance of your vanity may differ from the illustrations in this guide. This instructions still apply. Please ensure the finished wall

is straight and plumb and the floor is flat and perpendicular to the finished wall.

ROUGH-IN DIMENSIONS

SUGGESTED TOOLS AND MATERIALS

Philips Screwdriver Level Drill Tape Measure Safety Glasses

10'

24”

BLOX-DRG24XX

Model # X (inch)

20” (508mm)

21.5” (546mm)

FLOOR

FINISHED

WALL

X (inch)

Y (inch)

Undermount

Application Y (inch)

14”

SUGGESTED HEIGHT:

3-7/8” (100mm)

Summary of content (5 pages)

PAGE 1
INSTALLATION INSTRUCTIONS BLOX Combo TM VANITY HCK-BLOX-DRG24DWVC1 THANK YOU FOR CHOOSING HEMBRY CREEK Please take a few minutes to review this manual before you start installation. If you encounter any installation problems, please don’t hesitate to contact us. Before you begin, please observe all local building codes. Unpack the new product and inspect for damage. The appearance of your vanity may differ from the illustrations in this guide. This instructions still apply.
PAGE 2
WALL PREPARATION Notch studs 1-1/2" (38mm) to provide support for header. Extend the header beyond the countertop to the nearest stud. 2” x 12” Header SUGGESTED HEIGHT: Application Undermount Z (inch) 35” Z Finished Wall INSTALLATION INSTRUCTIONS 1. 2. Remove wood supports from the back of vanity.
PAGE 3
INSTALLATION INSTRUCTIONS HARDWARE INCLUDED BLS01 3. x8 Level the vanity with a leveler and attach the brackets to the 2 x 12 header using screws provided. CARE AND CLEANING • To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid extreme changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing furniture directly under windows.
PAGE 4
ADJUSTMENT SIDE 2 1 1 2 CAM HEIGHT TILT Rev 2/10 For customer support please email info@hembrycreek.
PAGE 5
INSTALLATION INSTRUCTIONS CHINA VANITY TOP SQUARE BOWL (all sizes) SUGGESTED TOOLS AND MATERIALS 10' Silicone Sealant Level Tape Measure Safety Glasses t lan e on lic Si a Se Optional Leveling Spacer (included) ** NOTE: top style, shape, cutout on top, vanity may vary from the picture above. Instructional purposes only. VANITY TOP INSTALLATIONS 1. Install the cabinet / vanity according to the cabinet / vanity manufacturer 2.