User's Manual

https://heltec.org
Documents
Rev 0.1
P 3 / 4
Apr. 2022
Heltec Automation © Limited standard files
2.2 Interface
Interface
Description
Power Source Input x 1
5V DC.
RJ45 Socket x 1
Ethernet connection.
SMA Socket x 1
LoRa antenna with SMA socket.
Anti-theft Lock Hole2 x 1
Fixing and anti-theft.
Button x 1
Single trigger -- Network configuration via Helium APP;
Long press -- System power off.
Type C Socket x 1
Used to flash firmware during production.
LED x 5
System status (Power, System, Miner Status, LoRa TX, LoRa Rx).
3. Quick start
Step 1
In order to set up the Hotspot, you need to download the phone app and to follow the
next steps. Normally, you start with “Add a new Hotspot”. Download the Helium App
directly from the App Store or Google Play by scanning the code below:
Step 2
Assemble the miner with the provided antenna.