User Manual

MMS
®
Inspection DPM High 31
Glossary
9.2.2 Display texts - Evaluation / statistics
Max • Largest single reading measured
Min • Smallest single reading measured
n Number of single readings measured
USL Upper specification limit
>USL Number of measured readings above the upper specification limit
R The range R equals the difference between the largest measurement
reading (maximum) and the smallest measurement reading (minimum) in
a series of measurements
s Standard deviation from mean value
LSL Lower specification limit
<LSL Number of measured readings below the lower specification limit
V[%] Coefficient of variation, percent variation of a series of measurements,
standard deviation in terms of the mean value
x
Arithmetic mean value from n single readings