User Manual

MMS
®
Inspection DPM High 15
Getting started
4 Getting started
All the settings relevant to measuring
and logging the surface temperature,
the ambient atmosphere and mea-
sured readings themselves are saved
in a file. Such a file is called a batch.
In the batch, you define the measure-
ment procedure, e.g. specification
limit and alarm monitoring for certain
factors during the measurement.
3 steps to the measurement
1. Switch on the gage,
2. Open a batch or create a new
one
• Opening a batch, see
page 18
• Creating a new batch, see
page 17
3. Logging measurements,
temperatures and climate
values, see page 19
After the gage is switched
on, the Measurement view
(example) for the batch that
was open at shutdown ap-
pears
Batch 001
%RH 34.9
Ta 26.1 °C
Ts
27.2 °C
Td
10.3 °C
Ts-Td
16.9 °C
n = 3