User Manual

Set up
14 MMS
®
Inspection DPM High
3 Set up
3.1 Installing batteries
Battery polarity
Observe the correct polarity when in-
serting the batteries!
Damage to the gage
The use of defective batteries or the
wrong type of battery causes dam-
age to the gage. Leaking batteries
destroy the gage's electronics.
► Use only undamaged batteries.
► Use only the following battery
types:
Alkaline, 1.5 V, AA - LR6
Lithium 1.5 V, AA - LR6
NiMH rechargeables, 1.2 V,
AA - HR6
Rechargeable batteries cannot
be charged in the gage
Individual rechargeable batteries in
the gage cannot be charged via the
USB port
► Use a commercially available
charger to charge individual
rechargeable batteries.
3.2 Switching on the gage
► Press the key for approx.
1 s.
The display shows the main
menu or Measurement view for
the batch that was open at shut-
down.
3.3 Switching off the gage
► Press the key for approx.
1 s.
What you can do next
• Setting the language: Main
Menu (V) > Gage Settings > OK
> Language > Select the desired
language > OK > 2 x
• Create a new batch, page 17