User Manual

42 MMS
®
Inspection SPG High
Glossary
Confirm the message/information
Opens a settings window, e.g. for setting the nominal value of the cali-
bration shim used
Cancels the setting process and returns to the previous menu page
Forward, skips the next step in the routine
Back
• Returns to the previous menu page, altered settings are applied
• Moves the cursor to the left when the name is entered
Switches to Measurement view
Opens the calibration from measurement view
Moves the cursor
• Moves the selection highlight
• Increases/decreases the numerical value displayed
Opens another menu page for a option selection
Turn page
Opens the Delete function
11.2.2 Display texts - Evaluation / statistics
Foil Nominal value entered for the calibration shim
Foil 1/2Calibration step Foil 1 or Foil 2 must be carried out
Max • Largest single reading measured within a block
• Largest spot value measured within one Area or Location
Min • Smallest single reading measured within a block
• Smallest spot value measured within an Area or Location
No Block number
n Number of measured location values
USL Upper specification limit