Owner manual

7251 ( R-7251 ) 06/24/07

INSTALLATION INSTRUCTIONS

REAR STABILIZER BAR

03-07 Dodge Sprinter 3500

2 3

559-734-7451 800-367-5480 FAX 559-734-7460

M10-1.50X60 bolt and

install spacer as shown

with emergency cable

bracket.

Install supplied bolt in

lower hole as shown.

PAGE 1
559-734-7451 800-367-5480 FAX 559-734-7460 INSTALLATION INSTRUCTIONS REAR STABILIZER BAR 03-07 Dodge Sprinter 3500 1 M10-1.50X60 bolt and install spacer as shown with emergency cable bracket. Install supplied bolt in lower hole as shown.
PAGE 2
559-734-7451 800-367-5480 FAX 559-734-7460 TORQUE TABLE BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES. NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST THE BAR, THE WEIGHT OF THE VEHICLE MUST BE ON THE SUSPENSION, AS IF DRIVING DOWN THE ROAD. DO NOT RAISE VEHICLE BY FRAME.