User guide

559-734-7451 800-367-5480 FAX [phone]
5. Attach reinforcement strap to frame
bracket as shown. Leave loose for adjust-
ment later.
6. Insert 3/8 x 1” stud into adapter plate as shown. Make sure thread is fully en-
gaged into plate. Leave 1/2 thread exposed on back side of plate as shown in
photo. Red lock-tite can be added to threads if desired.
7. Attach adapter plate to frame
rail using supplied M10-1.5 X
30 flat head bolt. Align slotted
hole with existing hole in frame
rail and tighten flat head bolt to
20-25 ft-lb.
5
7
6
7
6226 ( R-6226) 11/22/07