Ver: 1.1 User Manual 2.
service@hellobabyfamily.com THANK YOU FOR PURCHASING HELLOBABY BABY MONITOR. PLEASE ACTIVE AND EXTEND YOUR WARRANTY NOW. (Register within 7 days after receiving your product) To register your product Visit https:// www.hellobabyfamily.com Finished the form on the website That is it! Your product is now active and extend warranty! If you are unsatisfied with your product, please contact us via www.hellobabyfamily.com service@hellobabyfamily.com before leaving a negative review.
service@hellobabyfamily.com Thank you for purchasing the HB50 HelloBaby Baby Monitor. With our baby monitor, you could see and hear your baby sleeping or playing in their room anytime. Please retain your original dated sales receipt for your records. For warranty service of your HelloBaby product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
service@hellobabyfamily.com . The units do not appear to operate normally or exhibits a distinct change in performance; . The units have been dropped or the enclosure damaged; 2. WARRANTY TERMS We offer one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues, please contact our after-sales service via email. 3.
service@hellobabyfamily.com 3. Press and hold the power key 3 seconds on the top of the parent unit; 4.Once parent unit is on, the power LED will light up and the image will display on the LCD 5.3 INFRARED NIGHT VISION (AUTOMATIC) The infrared night vision function allows the camera to pick up images in dark or low light conditions. In this mode, only black and white images will be displayed on the m onitor, the optimum image lie in where baby unit is 6ft (2m) away from object.
service@hellobabyfamily.com 6. 3 BABY UNIT OVERVIEW: Light sensor Speaker Infrared LEDs CMOS sensor Pair key DC-Jack MIC Power LED Temperature sensor 7. KEY OPERATION 7.1 POWER SAVE/SCREEN OFF Short press the power key to turn on / off the screen. 7.2 VOLUME ADJUSTMENT Press the ▲ key to increase the volume; Press the ▼ key to decrease the volume; 7.3 BRIGHTNESS ADJUSTMENT Press the ◀ key to decrease the brightness; Press the ▶ key to increase the brightness; 7.
service@hellobabyfamily.com register a new baby unit, follow the procedure below: Note : Camera icon with " " means it is well registered. You should select and pair with the camera icon without " " sign. 8.1 .1 ADD CAMERA 1. Press the MENU key then the menu will pop up; 2. Press the ◀ / ▶ / ▲ / ▼ key until the camera icon is selected by red box; 3. Press OK key to enter into sub-menu, then press ▲ / ▼ key to select your desired camera; 4.
service@hellobabyfamily.com the parent unit to stop beeping and flashing. 8.3 LULLABY SETTING You can soothe the baby to sleep by playing a gentle lullaby from the Camera unit. 1. Press the MENU key then the menu will pop up; 2. Press the ◀ / ▶ / ▲ / ▼ key until the lullaby icon is selected by red box; 3. Press key enter into sub-menu; 4. Press the ◀ / ▶ / ▲ / ▼ key to select one of the 8 available lullabies, you can pick single playback, loop (all 8 lullabies) playback or stop ; 4. Press key to confirm.
service@hellobabyfamily.com 8.6 LANGUAGE SETTING 1. Press the MENU key then the menu will pop up; 2. Press the ◀ / ▶ / ▲ / ▼ key until the language icon is selected by red box. 3. Press key enter into sub-menu, then press ◀ / ▶ / ▲ / ▼ key to select the language you need; 4. Press key to confirm; 5. Press key to Exit. 9.
service@hellobabyfamily.com Audio feedback * The camera and monitor may be placed too closed; (high pitched noise) * The volume on the monitor may be set too high; Frozen Picture on Screen * Repower the baby unit (plug out the adapter, then plug it into the socket again); * Press the RESET key at the back of parent unit; 11. MAINTENANCE * Clean your baby monitor with a slightly damp or anti-static cloth. * Never use cleaning agents or solvents. 12.
service@hellobabyfamily.com Risk Group 1 WARNING IR emitted from this product. Do not stare at operating lamp Product tested against EN62471 WARNING Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9 m) away). Do not remove this tag. AVERTISSEMENT DANGER D’ÉTRANGLEMENT: Des enfants se sont ÉTRANGLÉS avec des cordons électriques. Garde le cordonélectrique hors de la portée des enfants(à plus de 0.9m/3 pi du lit d’enfant).
Trade Name : HelloBaby Model: HB50 Responsible Party: Startline LLC Add: 22 Hazelwood Drive, Jericho, NY 11753 Tel: 1-516-681-3729 Shenzhen Videotimes Technology Co.,Ltd Room 601, FL6, Building B, Chuanglingtong Technology Building, Shihua Road, Fubao Community, Fubao Street, Futian District, Shenzhen, China. Follow HelloBaby on Social Media! Facebook@hellobabybrand Instagram@hellobabybrand TikTok@hellobabyfamily Scan QR code with your smartphone.
