Datasheet

Material Daasheet
TT431
This information is based on our experience and does not imply suitability without prior testing. Due to the variables of manufacture and environmental
conditions it is strongly recommended that samples are tested in-situ. A legal binding assurance for definite attributes can not be derive
from our indications.
CM_V1.0/29.11.2018_MD
Gap sensor
Reflective sensor from below (optionally from
top)
Distance sensor from center to locating edge
Centered mm
Height of material passage mm
0-58
4
Labels , punch marks or print marks with translucent materials and end
of material
Print marks without translucent materials and end of material
label sensor with position indication
800
Main storrage (RAM) 256
Data storage (IFFS) MB 50
Battery for time and date, real-time clock Standard
Data storage when power turned off (e.g. serial
numbers)
Standard
Standard
RS232C 1.200 bis 230.400 baud/8 bit
USB 2.0 Hi-Speed Device für PC-Anschluss
Ethernet 10/100 BASE-T
1 x USB host at the operation panel
–25 - 60°C / 20 - 85% not condensing
CE, FCC class A, ICES3, CB,u UL
512
Electronics
Processor 32 bit clock rate MHz
Temperature / humidity: Operation
Temperature / humidity: Operation
Temperature / humidity: Storage
2 x USB host on the back of the device
For service key or USB memory stick
For keyboard, barcode scanner, USB memory stick, USB Bluetooth
adapter
Approvals
Standard
Standard
LPD, RawIP printing, FTP-Printing, DHCP, HTTP, FTP, SMTP, SNMP,TIME,
Zeroconf, mDNS, SOAP-Webservice
100 - 240 VAC ~ 50/60 Hz, PFC
Standby <10 W / typical 150 W / maximum 300 W
+5° - 40°C / 10 - 85% not condensing
0 - 60°C / 20 - 85% not condensing
Operating data
Peripheral connection USB host, 24 DC
HellermannTyton GmbH
Grosser Moorweg 45 Telefon: [phone]
D-25436 Tornesch Telefax: +49 (0) 4122/701-400
Interfaces
Power supply
Power consumption
Plug-in for SD memory card (SDHC, SDXC) up to
GB