Datasheet

Technical Datasheet TFN21
Technical data Test method
Base material: Polyolefin, cross linked
Continuous operating temperature: -55°C to +135°C IEC 216
Minimum shrink temperature: +70°C
Shrink ratio: 2:1
Conforms to: UL 224 125°C 600V VW1
CSA C22.2 NO 198.1-06 / 257387
Colours: Black, White, Red, Blue, Yellow, Green, Green/Yellow, Clear, Orange
Tensile strength: >14MPa ASTM D 2671
Elongation at break: >600% ASTM D 2671
Dielectric strength: >20 kV/mm ASTM D 150
Volume resistivity:
>10
14
Ωcm UL224
Resistance to: Acids: Good
Alkalis: Good
Oils: Good
Fuels: Good
Flammability: Self extinguishing (except clear) UL 224 VW1
Shelf life (<40°C): 5 years
As
supplied
Inner
diameter
Inner diameter Wall thickness
Type mm min. mm max. mm nom.
TFN21 1.2/0.6 1.2 0.6 0.40
TFN21 1.6/0.8 1.6 0.8 0.40
TFN21 2.4/1.2 2.4 1.2 0.48
TFN21 3.2/1.6 3.2 1.6 0.48
TFN21 4.8/2.4 4.8 2.4 0.48
TFN21 6.4/3.2 6.4 3.2 0.56
TFN21 9.5/4.8 9.5 4.8 0.62
TFN21 12.7/6.4 12.7 6.4 0.62
TFN21 16.0/8.0 15.9 8.0 0.68
TFN21 19.1/9.5 19.1 9.5 0.68
TFN21 25.4/12.7 25.4 12.7 0.87
TFN21 31.8/16.0 31.8 16.0 1.0
TFN21 38.1/19.1 38.1 19.1 1.0
TFN21 50.8/25.4 50.8 25.4 1.1
TFN21 76.2/38.1 76.2 38.1 1.2
TFN21 102/50.8 102.0 50.8 1.35
TFN21 125/63.5 125.0 63.5 1.4
TFN21 150/75 150.0 75.0 1.4
HellermannTyton GmbH
Grosser Moorweg 45 Telefon: [phone]
D-25436 Tornesch Telefax: +49 (0) 4122/701-400
This information is based on our experience and does not imply suitability without prior testing. Due to the variables of manufacture and enviromantel conditions it is
strongly recommended that samples are tested in-situ
Type designation and Technical data
Fully recovered
(For order no. please contact us!)
CM.V2.2_15.10.2018_MH