Datasheet

1.1
23Further information and products at www.HellermannTyton.co.uk/a23
Date of issue: January 2014
Material Information
Cable Ties and Fixings
Material
Properties*
Shortcut
Operating
Temperature
Colour**
Flammability
Material
Material Specification Overview
Polyamide 6.6
high impact
modified, heat and
UV stabilised
PA66-
HIRHSW
-40 °C to +110 °C
Black
(BK)
UL94 HB
•Limited brittleness sensitivity
•Higher flexibility at low temperature
•Modified elevated max. temperature
•High yield strength, UV-resistant
Polyamide 6.6
UV Resistant
PA66W
-40 °C to +85 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 V2
•High yield strength
•UV-resistant
Polyamide 6.6 V0 PA66V0 -40 °C to +85 °C
White
(WH)
UL94 V0
•High yield strength
•Low smoke emission
Polyamide 6.6 V0
High Oxygen Index
PA66-
V0-HOI
-40 °C to +85 °C,
(+105 °C, 500 h)
White
(WH)
UL94 V0
•High yield strength
•Low smoke emissions
Polyamide 6.6
with metal particles
PA66MP
-40 °C to +85 °C,
(+105 °C, 500 h)
Blue (BU) UL94 HB •High yield strength
Polyamide 6
high impact mo-
dified
PA6HIR -40 °C to +80 °C
Black
(BK)
UL94 HB
•Limited brittleness sensitivity
•Higher flexibility at low temperature
Polyester SP -50 °C to +150 °C
Black
(BK)
•UV-resistant
•Good chemical resistance to: most acids, alkalis
and oils
Polyetheretherke-
tone
PEEK -55 °C to +240 °C
Beige
(BGE)
UL94 V0
•Resistance to radioactivity
•Not moisture sensitive
•Good chemical resistance to: acids, bases,
oxidizing agents
Polyethylene PE -40 °C to +50 °C
Black
(BK),
Grey
(GY)
UL94 HB
•Low moisture absorption
•Good chemical resistance to: most acids, alcohol
and oils
Polyolefin PO -40 °C to +90 °C
Black
(BK)
UL94 V0 •Low smoke emissions
Polypropylene PP -40 °C to +115 °C
Black
(BK),
Natural
(NA)
UL94 HB
•Floats in water
•Moderate yield strength
•Good chemical resistance to: organic acids
Polypropylene,
Ethylene-Propyle-
ne-Dien-Terpoly-
mere-rubber free
of Nitrosamine
PP, EPDM -20 °C to +95 °C
Black
(BK)
UL94 HB
•Good resistance to high temperatures
•Good chemical and abrasion resistance
Polyvinylchloride PVC -10 °C to +70 °C
Black
(BK),
Natural
(NA)
UL94 V0
•Low moisture absorption
•Good chemical resistance to: acids, ethanol, oil
Stainless Steel
SS304,
SS316
-80 °C to +538 °C
Natural
(NA)
•Corrosion resistant
•Antimagnetic
Thermoplastic
Polyurethane
TPU -40 °C to +85 °C
Black
(BK)
UL94 HB
•High elastic
•Good chemical resistance to:
•acids, bases, oxidizing agents
Tefzel® is a registered trademark of DuPont.
General linguistic usage for cable ties made from raw material E/TFE is Tefzel®-Tie. In additon to Tefzel® from
DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers.
**More colours on request.
* These details are only rough guide values. They should be regarded as a material specification and are no
substitute for a suitability test. Please see our datasheets for further details.
= Minimum Tensile Strength