Datasheet

1.1
22 Further information and products at www.HellermannTyton.co.uk/a22
Date of issue: January 2014
Material Information
Cable Ties and Fixings
Aluminium-alloy AL -40 °C to +180 °C
Natural
(NA)
•Corrosion resistant
•Antimagnetic
Chloroprene CR -20 °C to +80 °C
Black
(BK)
•Weather-resistant
•High yield strength
Ethylenterafluori-
neethylen
E/TFE -80 °C to +170 °C Blue (BU) UL94 V0
•Resistance to radioactivity
•UV- resistant, not moisture sentitive
•Good chemical resistance to:
•acids, bases, oxidizing agents
Polyacetal POM
-40 °C to +90 °C,
(+110 °C, 500 h)
Natural
(NA)
UL94 HB
•Limited brittleness sensitivity
•Flexible at low temperature
•Not moisture sensitive
•Robust on impacts
Polyamide 11 PA11
-40 °C to +85 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 HB
•Bio-plastic, derived from vegetable oil
•Strong impact resistance at low temperature
•Very low moisture absorption
•Weather-resistant
•Good chemical resistance
Polyamide 12 PA12
-40 °C to +85 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 HB
•Good chemical resistance to:
•acids, bases, oxidizing agents
•UV- resistant
Polyamide 4.6 PA46
-40 °C to +150 °C
(5000 h), +195 °C
(500 h)
Natural
(NA),
Grey
(GY)
UL94 V2
•Resistance to high temperatures
•Very moisture sensitive
•Low smoke sensitive
Polyamide 6 PA6 -40 °C to +80 °C
Black
(BK)
UL94 V2 •High yield strength
Polyamide 6.6 PA66
-40 °C to +85 °C,
(+105 °C, 500 h)
Black
(BK),
Natural
(NA)
UL94 V2 •High yield strength
Polyamide 6.6,
Glassfibre reinforced
PA66GF13,
PA66GF15
-40 °C to +105 °C
Black
(BK)
UL94 HB
•Good resistance to: lubricants, vehicle fuel, salt
water and many solvents
Polyamide 6.6
heat and UV sta-
bilised
PA66HSW -40 °C to +105 °C
Black
(BK)
UL94 V2
•High yield strength
•Modified elevated max. temperature
•UV-resistant
Polyamide 6.6
Heat Stabilised
PA66HS -40 °C to +105 °C
Black
(BK),
Natural
(NA)
UL94 V2
•High yield strength
•Modified elevated max. temperature
Polyamide 6.6
High Imp. Mod.,
Heat Stab.
PA66HIRHS -40 °C to +105 °C
Black
(BK)
UL94 HB
•Limited brittleness sensitivity
•Higher flexibility at low temperature
•Modified elevated max. temperature
Polyamide 6.6
High Imp. Mod.
scan black
PA66HIR(S)
-40 °C to +80 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 HB
•Limited brittleness sensitivity
•Higher flexibility at low temperature
Polyamide 6.6
High Impact Mo-
dified
PA66HIR
-40 °C to +80 °C,
(+105 °C, 500 h)
Black
(BK)
UL94 HB
•Limited brittleness sensitivity
•Higher flexibility at low temperature
Tefzel® is a registered trademark of DuPont.
General linguistic usage for cable ties made from raw material E/TFE is Tefzel®-Tie. In additon to Tefzel® from
DuPont HellermannTyton is also using equivalent E/TFE raw material from other suppliers.
**More colours on request.
* These details are only rough guide values. They should be regarded as a material specification and are no
substitute for a suitability test. Please see our datasheets for further details.
Material
Properties*
Shortcut
Operating
Temperature
Colour**
Flammability
Material
Material Specification Overview
= Minimum Tensile Strength