Datasheet

2.1
196
Further information at www.HellermannTyton.com/insulation
Date of issue: October 2015
Insulation
Heat Shrinkable Tubing
MATERIAL
Polyolefin, cross-linked (PO-X)
Shrink Ratio 3:1
Operating Temperature -55 °C to +110 °C
Minimum Shrink
Temperature
+110 °C
Longitudinal change
after shrinkage
+1 %/-15 % max.
Dielectric Strength 15 kV/mm according to ASTM D2671
Flammability self-extinguishing (except for transparent)
Insulation Class A (VDE 0530)
Specifications
SAE - AMS - DTL-23053/4 Class 3
(except clear)
The black tubing is mainly used for environmental sealing of splices and
connectors. The transparent tubing is typically used for protection of
cable markers.
Features and Benefits
• Adhesive lined heat shrink tubing
• Attractive and reusable kit ideal for assembling and identification
• Inner wall melts when heated and is forced into gaps
• Adhesive forms seal against moisture as tubing cools
• Black tubes mainly for the protection of connectors and splices
• Clear tubing ideal for protection of printed label markers
• Case can be re-used for storing nails, screws, nuts, fish hooks, etc.
Heat Shrinkable Tubing 3:1 in a Kit
ShrinKit 321-A Basic.
Shrinkit 321-A Basic - with adhesive liner
Heat Shrinkable Tubing 3:1 with adhesive
L
For product specific approvals and specifications please refer to the Appendix.
COMP.
Supplied
Ø D min.
Recov.
Ø d max.
Length
(L)
Wall
(WT) Colour
Content
(pcs.) Article-No.
1 3.0 1.0 35.0 1.00 Black (BK) 25
380-03004
2 12.0 4.0 35.0 1.70 Black (BK) 10
3 3.0 1.0 35.0 1.00 Transparent (CL) 25
4 6.0 2.0 35.0 1.10 Black (BK) 15
5 6.0 2.0 35.0 1.10 Transparent (CL) 15
6 6.0 2.0 35.0 1.10 Transparent (CL) 15
7 6.0 2.0 35.0 1.10 Black (BK) 15
8
12.0 4.0 80.0 1.70 Black (BK) 5
12.0 4.0 80.0 1.70 Transparent (CL) 5
All dimensions in mm. Subject to technical changes.