Datasheet

53
1.1
Further information at www.HellermannTyton.com/fixings
Date of issue: October 2015
Cable Ties and Fixings
Cable Ties Inside Serrated
2. To release the tie push the tail slightly out of
the head.
1. Insert the thin part of the cable tie into the
open lock head.
3. When the installation is complete, the Q-tie can
be tightened and cut off - either manually or
with an application tool.
1. Insert tail into the open head and push the tail
partly into the head.
Features of Q-ties:
Application Method:
Pre-Locking Function of the Q-tie:
1. Open lock head for quick
and easy insertion.
2. Two rails on the strap ensure perfect
guidance for the tracks in the head.
3. The locking device interacts safely with
the serration of the cable tie.
4. The tracks prevent a deformation
of the head under load.
5. The thin part of the cable tie can be
simply placed into the open lock head.
6. The large ribbed tail allows a safe
and ergonomic installation.
7. Integrated pre-locking feature
(starts with type Q30).
2. Pull the tie through the head until the bundle
is fixed.
3. Cut off the remaining part of the tie with an
application tool.
Please find more
Q-Series products
for your system solution
on page 134 and 459.