Datasheet

2.2
286
Further information at www.HellermannTyton.com/insulation
Date of issue: 10/2017
Insulation
Heat Shrinkable Moulded Shapes
MATERIAL
Polyolefin, cross-linked (PO-X)
Colour Black (BK)
Shrink Ratio 3:1
Min. Shrink Temperature +120 °C
Operating Temperature -45 °C to +125 °C
Dielectric Strength 15 kV/mm according to IEC 684 P2
Flammability
self-extinguishing in 30 seconds
according to SAE-AMS-DTL-23053/4
Pinched End Caps can be used for mechanical and environmental
protection of stub splices in electrical harnesses. Due to the fast and
easy installation, these caps can be used for non-electrical applications
as well.
Features and benefits
• Small size End Caps
• Fast and easy application
• With Inner adhesive layer for moisture sealing
• 3:1 shrink ratio
• Different diameters for wide application range
• Other lengths available on request
One Step to the Web!
Pinched End Caps
The appropriate end cap for every cable diameter, and cable types.
Helashrink PEC Series, low voltage
PEC-Series expanded
L2
PEC-Series recovered
TYPE
Supplied
Ø D min.
Recov.
Ø d max.
Wall
(WT)
Length
(L)
Length
(L2)
Pack
Cont. Article-No.
PEC-3/1 3.0 1.0 1.00 25.0 20.0 50 pcs. 416-00000
PEC-4.8/1.5 4.8 1.5 1.00 30.0 25.0 50 pcs. 416-00003
PEC-6/2 6.0 2.0 1.00 30.0 25.0 50 pcs. 416-00001
PEC-9/3 9.0 3.0 1.40 35.0 27.0 50 pcs. 416-00002
All dimensions in mm. Subject to technical changes.
Minimum Order Quantity (MOQ) may differ from package content.