Datasheet

2.2
269
Further information at www.HellermannTyton.com/insulation
Date of issue: October 2015
Insulation
Heat Shrinkable Moulded Shapes
MATERIAL
Polyolefin, cross-linked (PO-X)
Colour Black (BK)
Shrink Ratio 3:1
Minimum Shrink
Temperature
+120 °C
Operating Temperature -45 °C to +125 °C
Dielectric Strength 15 kV/mm according to IEC 60684 P2
Flammability
self-extinguishing in 30 seconds
according to SAE-AMS-DTL-23053/4
Pinched End Caps can be used for mechanical and
environmental protection of stub splices in electrical
harnesses. Due to the fast and easy installation, these caps can be used
for non-electrical applications as well.
Features and Benefits
• Small size End Caps
• Fast and easy application
• With Inner adhesive layer for moisture sealing
• 3:1 shrink ratio
• Different diameters for wide application range
• Other lengths available on request
One Step to the Web!
Pinched End Caps
The appropriate end cap for every cable diameter, and cable types.
Helashrink PEC Series, low voltage
PEC-Series expanded.
L2
PEC-Series recovered.
TYPE
Supplied
Ø D min.
Recov.
Ø d max.
Wall
(WT)
Length
(L)
Length
(L2)
Pack
Cont. Article-No.
PEC-3/1 3.0 1.0 1.00 25.0 20.0 50 pcs. 416-00000
PEC-4.8/1.5 4.8 1.5 1.00 30.0 25.0 50 pcs. 416-00003
PEC-6/2 6.0 2.0 1.00 30.0 25.0 50 pcs. 416-00001
PEC-9/3 9.0 3.0 1.40 35.0 27.0 50 pcs. 416-00002
All dimensions in mm. Subject to technical changes.
For Material / Adhesive information
please refer to page 244.