Datasheet

3.7
366
Further information at www.HellermannTyton.com/protection
Date of issue: 10/2017
Cable Protection Systems
Wiring Ducts
MATERIAL
Polyamide 6 (PA6)
Operating Temperature -40 °C to +80 °C
Flammability UL94 V2
HelaDuct HTWD-CTH is used to anchor a cable tie securely to the base
of a duct. The HTWD-TL is used to fix a HTWD-RB rail mounting block to
duct or to fix smaller ducts inside larger ones.
Features and benefits
• Holds all components firmly in place
• Cable tie easily laced through HTWD-CTH
• Anchor of mount remains inside raised mounting point and does not
protrude below surface of duct base
For fastening components to base of ducts
HTWD-CTH and HTWD-TL for mounting components to base of ducts.
HelaDuct HTWD-CTH and HTWD-TL Mounts
TYPE For Wiring Ducts Colour
Pack
Cont. Article-No.
HTWD-CTH HTWD-PN, HTWD-PW White (WH) 50 pcs. 181-45029
HTWD-TL HTWD-PN, HTWD-PW White (WH) 100 pcs. 181-45019
All dimensions in mm. Subject to technical changes.
Minimum Order Quantity (MOQ) may differ from package content.
For a unique solution for
mounting wiring ducts to DIN rails,
use HTWD-TL together with the
HTWD-RB rail blocks on page 368.
18
14
6
3,5
13
9
6
HTWD-TL Mount
13
7
HTWD-CTH Mount