Datasheet

ManualsBrandsHellermannTyton ManualsCable & WireHeat-Shrink Tubing 2:1, 2.4 ... 4.8mm, Black, 1m

2.1

211

Further information at www.HellermannTyton.com/insulation

Date of issue: October 2015

TYPE

Supplied

Ø D min.

Size

(imperial)

Recov.

Ø d max.

Wall

(WT)

Reel

Length Colour

Designation as per

VG-Norm Article-No.

HFT-A-1.2/0.6

1.2 3/64 " 0.6 0.40 400 m Black (BK) VG 95343 T05 A 001A 305-01200

1.2 3/64 " 0.6 0.40 400 m Blue (BU) VG 95343 T05 A 001 G 305-01206

1.2 3/64 " 0.6 0.40 400 m Red (RD) VG 95343 T05 A 001 C 305-01202

1.2 3/64 " 0.6 0.40 400 m White (WH) VG 95343 T05 A 001 L 305-01209

1.2 3/64 " 0.6 0.40 400 m Yellow (YE) VG 95343 T05 A 001 E 305-01204

HFT-A-1.6/0.8

1.6 1/16 " 0.8 0.40 400 m Black (BK) VG 95343 T05 A 002 A 305-01600

1.6 1/16 " 0.8 0.40 400 m Blue (BU) VG 95343 T05 A 002 G 305-01606

1.6 1/16 " 0.8 0.40 400 m Red (RD) VG 95343 T05 A 002 C 305-01602

1.6 1/16 " 0.8 0.40 400 m White (WH) VG 95343 T05 A 002 L 305-01609

1.6 1/16 " 0.8 0.40 400 m Yellow (YE) VG 95343 T05 A 002 E 305-01604

All dimensions in mm. Subject to technical changes.

Minimum Order Quantity (MOQ) may differ from package content.

Insulation

Heat Shrinkable Tubing

MATERIAL

Polyoleﬁn, cross-linked (PO-X)

Shrink Ratio 2:1

Operating Temperature -55 °C to +135 °C

Minimum Shrink

Temperature

+100 °C

Longitudinal change

after shrinkage

+5 %/-10 %

Dielectric Strength 20 kV/mm according to IEC 60684 P2

Flammability Self extinguishing

Speciﬁcations

ASN-E0126, CSA, DEF STAN 59-97/3,

LEA, MIL-DTL-23053/5C, NF F 00-608,

NSA937211, PAN6493, SAE - AMS -

DTL-23053 / 5C, UL224 125 °C 600V,

VG 95343

This high performance thin wall tubing is used extensively for electrical

and mechanical protection. It is also well proven for sleeve marking

to identify wiring circuits. It shrinks uniformly to form a permanent

insulation covering.

The transparent version is used for bundling and cable protection where

visual inspection is required. It is often used as a see through protective

sleeve over cable markers.

Features and Beneﬁts

• Flexible heat shrink tubing

• Fast shrinking, easy handling, good mechanical strength

• Easy to print on

• Wide range of colours

• Internal diameters up to 4 inches (101.6 mm)

• UL-224 ,CSA listed and VG approved

Heat Shrinkable Tubing 2:1 ﬂexible and coloured

HFT-A conforms to major standards used in all Defence industries.

HFT-A - self extinguishing

Heat Shrinkable Tubing 2:1

LEAASN

For product speciﬁc approvals and speciﬁcations

please refer to the Appendix.

Standard sizes available in colours black,

red, blue, yellow, white and green-yellow.

Summary of content (3 pages)

PAGE 1
Insulation Heat Shrinkable Tubing 2.1 Heat Shrinkable Tubing 2:1 flexible and coloured HFT-A - self extinguishing This high performance thin wall tubing is used extensively for electrical and mechanical protection. It is also well proven for sleeve marking to identify wiring circuits. It shrinks uniformly to form a permanent insulation covering. The transparent version is used for bundling and cable protection where visual inspection is required.
PAGE 2
Insulation 2.1 Heat Shrinkable Tubing Heat Shrinkable Tubing 2:1 flexible and coloured HFT-A - self extinguishing Heat Shrinkable Tubing 2:1 TYPE HFT-A-2.4/1.2 HFT-A-3.2/1.6 HFT-A-4.8/2.4 HFT-A-6.4/3.2 HFT-A-9.5/4.8 HFT-A-12.7/6.4 Supplied Ø D min. Size (imperial) Recov. Ø d max. Wall (WT) Reel Length Colour Designation as per VG-Norm Article-No. 2.4 3/32 " 1.2 0.50 100 m Blue (BU) VG 95343 T05 A 003 G 305-02406 2.4 3/32 " 1.2 0.
PAGE 3
Insulation Heat Shrinkable Tubing 2.1 Heat Shrinkable Tubing 2:1 flexible and coloured HFT-A - self extinguishing Heat Shrinkable Tubing 2:1 TYPE HFT-A-19.0/9.5 HFT-A-25.4/12.7 HFT-A-38.0/19.0 HFT-A-50.8/25.4 HFT-A-76.0/38.0 HFT-A-101.6/50.8 Supplied Ø D min. Size (imperial) Recov. Ø d max. Wall (WT) Reel Length Colour Designation as per VG-Norm Article-No. 19.0 3/4 " 9.5 0.80 25 m Blue (BU) VG 95343 T05 A 009 G 305-19006 19.0 3/4 " 9.5 0.