Datasheet

Electrical Tapes
459
Installation Devices
Article-No. Type
Thickness
(T)
Width
(W)
Reel Length
(m) Colour
711-00300
HTAPE-POWER750
3.2 38 1.5 Black (BK)
All dimensions in mm. Subject to technical changes.
Material Butyl rubber (IIR)
Operating Temperature +80 °C
Intermittent Operating Temperature +95 °C
Water Absorption 0.13 %
Tensile Strength 0.35 MPa
Elongation at break 1000 %
Volume Resistance 10¹³ ⍀ cm
Material Natural Rubber (NR)
Operating Temperature +80 °C
Intermittent Operating Temperature +95 °C
Tensile Strength 2.40 MPa
Elongation at break 450 %
Volume Resistance 10¹³ ⍀ cm
Dielectric Strength 25 kV/mm
Article-No. Type
Thickness
(T)
Width
(W)
Reel Length
(m) Colour
711-00200
HTAPE-POWER600
0.76 19 6.7 Black (BK)
711-00201
HTAPE-POWER600
0.76 38 6.7 Black (BK)
All dimensions in mm. Subject to technical changes.
• HelaTape Power 600 -
self-amal gamating low voltage tape

halogenfree
• HelaTape Power 750 -
medium voltage mastic tape
Features and Benefits
HelaTape Power 750 is a self-amalgamating,
low-voltage insulating compound designed
for quick, void-free insulation layering. It
can be easily moulded by hand to conform
to irregular shapes. It can be used as
primary insulation for splices up to 5 kV in
conjunction with other insulating tapes. It is
ideal for covering split bolts, padding bus
bar edges and connections, and provides an
excellent seal against moisture.
HelaTape Power 600 is a self-amalgamating
low-voltage rubber tape.
HelaTape Power - Rubber and
high voltage tapes
Features and Benefits
HelaTape Power 600 is a self-amalgamating
low-voltage rubber tape for use as primary
insulation at not more than 600 volts.
It easily conforms to irregular shapes and
surfaces, providing a void-free electrically
stable layering. It is compatible with all
extruded dielectric cable insulations.
Material Data
Material Data

halogenfree
HelaTape Power 750 is a self-amalgamating,
low-voltage insulating compound.
Technical Table
Technical Table
4.4
Date of issue: April 2011