Data Sheet

MATERIAL DATASHEET HelaTape Flex 1000+
Technical Data
Material : Polyvinylchlorid
(PVC)
Colours : black, blue, red, yellow, green, white, brown and grey
Adhesive : Rubber based
Insulation Voltage Range : max 1000 Volt
Approvals : VDE approved
Specification Typical Value Test Method
Thickness : 0.18 mm ASTM-D-1000
Tensile Strength : 35 N / 10 mm ASTM-D-1000
Elongation : 300 % ASTM-D-1000
Adhesion To Steel : 3.0 N / 10 mm ASTM-D-1000
Adhesion To Backing : 2.7 N / 10 mm ASTM-D-1000
Adhesion To Backing at -7°C : 5.5 N / 10 mm ASTM-D-1000
Flagging (max) : 2.5 mm ASTM-D-1000
Processing Temperature : -18°C to +60 °C IEC 6454-2
Application Temperature : -30°C to +90 °C IEC 6454-2
Temperature rating CSA : -18°C to +105 °C CSA 22.2
Dielectric Strength
: 40kV EN 60454
Standard : 10 kV ASTM-D-1000
Wet : 9 kV ASTM-D-1000
Dielectric Constant : 3.2 ASTM-D-150
Insulation Resistence
: 10
6
MΩ
ASTM-D-1000
Resistivities
Flame : yes
Cold : yes
Weather : yes
Highly resistent to : sun, water, oil, acids, alkalis and corrosive chemicals
Flame retardant : yes
Lead-free : yes
HelaTape Flex 1000+ does not contain diethylhexyl phthalate (DEHP).
Shelf life 5 years at recommended storage conditions.
Recommended storage conditions Relative humidity: 65%
Room temperature: 23°C
HellermannTyton GmbH
Grosser Moorweg 45 Telefon: [phone]
D-25436 Tornesch Telefax: +49 (0) 4122/701-400
Data in this table represent average test results and not to be used for specification purposes.
The product user should make his/her own test to determine the product's suitability for the intended use
PM.04_16.10.2017_hm