Datasheet

48
03/2017 031-93417 CAT RELICON For product specific approvals please contact us under www.HellermannTyton.com
RELICON Relifix gel technology offers several advantages. It is quick and
easy to install. The moulding shells are provided with a film hinge and
are made from thick-walled, tough and impact resistant polypropylene
(PP). The Relicon gel in the shells insulates and seals the complete
connection as the joint is closed. Depending on the connector type,
Relifix can be used as a universal straight-through or branch joint. It is
suitable for jointing on polymeric cables and wires made of PVC, XLPE,
PE, EPR etc.
Application: In low-voltage electrical networks as straight-through and/
or branch joint, e.g. underground, submerged, outdoor, indoor and
wiring ducts.
Features and Benefits
• Moulding shell: One piece, coloured, re-openable, impact-proof,
flame retardant
• Filled with Relicon non-toxic gel, high dielectric strength
• No mixing, easy to install
• UV, ageing and weather resistant
• Unlimited shelf life
• Certified according to EN 50393 (corresponds to DIN VDE 0278-393)
Insulation
Gel Technology
MATERIAL
Polypropylene (PP), Silicone Rubber (SIR)
Colour Green (GN)
Operating Temperature -20 °C to +90 °C
Shelf Life Unlimited
Gel cable joint Relifix 410, 416.
Gel cable joint without connector
RELICON Relifix
Without
connector block!
Content of Set / Kit
• Moulding shells filled with RELICON gel
• Installation instructions
• Separator plate
• Cable ties
TYPE
Ø
Main
Cable
Main Cable
mm²
min - max
Branch Cable
mm²
min - max
Length
(L)
Width
(W)
Height
(H) Article-No.
Relifix 410 9-20 3 x 1.5 4 x 10 3 x 1.5 4 x 2.5 146.0 55.0 35.0 435-00652
Relifix 416 9-22 3 x 1.5 4 x 16 3 x 1.5 4 x 4 180.0 69.0 40.0 435-00653
All dimensions in mm. Subject to technical changes.
Relifix 410, 416
W
L
H