Safety data sheet
Table Of Contents
- 435-0075x_Religel_Deckblatt_Multilingual MSDS
- HT_MSDS_Religel_1.1_Hardener_1.1_dt
- HT_MSDS_Religel_1.1_Hardener_1.1_engl
- HT_MSDS_Religel_1.1_Hardener_1.1_fr
- HT_MSDS_Religel_1.1_Hardener_1.1_it
- HT_MSDS_Religel_1.1_Religel Hardener_1.1_pol
- HT_MSDS_Religel_1.1_Hardener_1.1_dk
- HT_MSDS_Religel_1.1_Religel Hardener_1.1_s
Safety Data Sheet according to Regulation
(EC) No. 1907/2006 (REACH)
Religel - Hardener
Print date 26.03.2018
Revision date 26.03.2018
Version 1.1
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
Physical state
liquid
Colour
as per labelling
Odour
characteristic
parameter Method - source - remark
pH not determined
Melting point/freezing point not determined
Initial boiling point and boiling range not determined
Flash point (°C) >180 °C EN ISO 2719
Evaporation rate not determined
flammability not determined
Upper explosion limit not determined
Vapour pressure not determined
Vapour density not determined
Relative density ca.0,97 g/cm³ Temperature 20 °C
Fat solubility (g/L) not determined
Water solubility (g/L) The study does not need to be
conducted because the substance is
known to be insoluble in water.
Soluble (g/L) in not determined
Partition coefficient: n-octanol/water not determined
Auto-ignition temperature not determined
Decomposition temperature not determined
Dynamic viscosity not determined
flow time 12,5 S Temperature 20 °C 4 DIN 53211
flow time 10 S Temperature 20 °C 6 DIN EN ISO 2431
Kinematic viscosity not determined
9.2 Other information
No data available
SECTION 10: Stability and reactivity
10.1 Reactivity
No information available.
Page 5/7