Safety data sheet

Safety Data Sheet according to Regulation
(EC) No. 1907/2006 (REACH)
Religel
Print date 26.03.2018
Revision date 26.03.2018
Version 1.1
Skin protection
Suitable gloves type:
Gloves with long cuffs
Suitable material:
NBR (Nitrile rubber)
CR (polychloroprene, chloroprene rubber)
Thickness of the glove material >0,4 mm
Wearing time with occasional contact (splashes): >480 min
Recommended glove articles
DIN-/EN-Norms:
DIN EN 374
additional hand protection measures
Take recovery periods for skin regeneration.
remark
When handling with chemical substances, protective gloves must be worn with the CE-label including the four
control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the
specific working place concentration and quantity of hazardous substances.
Body protection:
Suitable protective clothing:
Chemical protection clothing
Respiratory protection
Respiratory protection necessary at:
insufficient ventilation
dust formation
remark
Usually no personal respirative protection necessary.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance
Physical state
liquid
Colour
as per labelling
Odour
characteristic
parameter Method - source - remark
pH not determined
Melting point/freezing point not determined
Initial boiling point and boiling range not determined
Flash point (°C) 180 °C EN ISO 2719
Evaporation rate not determined
flammability not determined
Upper explosion limit not determined
Page 4/7